The wheel alignment procedure is very important, although it is pretty basic and is done by most garages every time you take the car for maintenance. The reason this is done is to to reduce the wear and tear on the tire, to make sure that the car runs straight and ultimately, that the driver and passengers have a safe trip. The wheel alignment is something which can be changed easily, provided you find such a facility. This is quite advanced, and is done in motor sport circles to increase the speed of the car. All manufactured vehicles have a default factory setting. If you wish to know that the wheel alignment is proper, you need to see the adjustment hardware. If it has been painted, you will know that the wheel alignment is safely set. For those you who are looking forward to change the settings the next time your car is in the garage, a good idea is to wait until it has run at least 5000 kilometers.
Usually, when problems in this crop up in the alignment, car owners do not notice it at first. But the damage becomes evident and strongly noticeable when the tires show signs of wear and tear. When there is damage, the car will tend to run heavily on one side. It is always a good idea to get your car's tires checked out because if they do get permanently damaged, you shall need to replace them, which costs a lot. However, the good news is that car tires are built to put with all kinds of heavy use and do not get damaged easily. Research has shown that on an average, cars run at least 50000 kilometers before showing any kind of damage. Regardless of how much distance you drive every day, such a large total distance means that you get a lot of time to get the car checked for maintenance services at least a couple of times.
One thing to remember is that the Wheel Alignment in Singapore takes time depending on the type of car you have. For instance, if you have got an economy class sedan the service shall take just one hour to get the car repaired. If you have a luxury car, a sport car or a utility vehicle, it shall take more hours along with additional labor from the garage. Apart from this, the technicians may notice that some of the parts may need servicing and replacement as well in order to have a smooth drive. Such parts include certain hardware and fasteners. If such is the case, additional hours shall be needed. But be rest assured that the service shall be completed within a day or two.
There are three things you need to know to get a good Car Servicing in Singapore. Camber is the wheel's angle and is measured in degrees. Caster is the steering pivots angle while the Toe is the space between the wheels.
|